USD20361

Stepper Drive for PCB mounting 12..42Vdc 0.15..1.2Apk

Matching motors

M1233031 M1233031
  • Torque 1Nm (142oz-In)
  • Current 0.62Arms
  • NEMA 23 standard flange
M1233021 M1233021
  • Torque 0.8Nm (113oz-In)
  • Current 0.62Arms
  • NEMA 23 standard flange
M1233011 M1233011
  • Torque 0.55Nm (77oz-In)
  • Current 0.62Arms
  • NEMA 23 standard flange
M1173040 M1173040
  • Torque 0.5Nm (71oz-In)
  • Current 0.7Arms
  • NEMA 17 standard flange
M1173030 M1173030
  • Torque 0.4Nm (56oz-In)
  • Current 0.7Arms
  • NEMA 17 standard flange
M1173021 M1173021
  • Torque 0.28Nm (39oz-In)
  • Current 1.3Arms
  • NEMA 17 standard flange
M1173020 M1173020
  • Torque 0.28Nm (39oz-In)
  • Current 0.7Arms
  • NEMA 17 standard flange
USD20361 The USD modules are bipolar stepper motor drives designed for PCB mounting.

They represent the perfect solution to save space and remove the cables as perfectly integrable with the electronics»read more

Technical Data

Power Supply Voltage From 12Vdc up to 42Vdc
Phase current From 0.15Apk up to 1.2Apk
Logic Supply Voltage 5Vdc
Control Mode Step and Direction
Digital Inputs 5 TTL/CMOS compatible: STEP, DIRECTION, ENABLE, STANDBY, RESET
3 TTL/CMOS compatible: RS0, RS1, RS2 for the resolution setting
2 analog for the phase current setting
Digital Outputs 1 open collector: FAULT
Step subdivision Selectable from full step to 1/2 step
Protections, Alarms and Diagnostics Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
Connections Via solder pins
Dimensions 44.5(H) x 55(L) x 28.5(W) mm
1.75(H) x 2.17(L) x 1.12(W) inches
Weight 120g
4.23oz

Benefits

  • Compact size
  • Change the resolution on the fly
  • TTL / CMOS microcontroller compatible
  • Internal pull-up resistors on each input
  • IP65 protection degree
  • Low cost