LS1076

Stepping Motor Driver 90Vdc 6Arms (8.5Apk)

Related Products

UDP30 UDP30
  • Galvanic isolation
  • Drivers from Windows 98SE to Windows 7 32bit or 64bit
  • Powered via USB port
UDP Commander UDP Commander
  • Running under Windows
  • Simple and intuitive use
  • Single tool for all drives xS10, DS30 and DS5x
  • Free!
DP1741 DP1741
  • Single or three phase input up to 68Vac
  • Output up to 100Vdc
  • Current up to 16Arms
DP1742 DP1742
  • Braking resistor control
  • Single or three phase input up to 68Vac
  • Output up to 100Vdc
  • Current up to 16Arms

Matching motors

M1343011 M1343011
  • Torque 3.1Nm (439oz-In)
  • Current 2.8Arms or 5.6Arms
  • NEMA 34 standard flange
M1233071 M1233071
  • Torque 3Nm (425oz-In)
  • Current 6Arms
  • NEMA 23 standard flange
M1233070 M1233070
  • Torque 3Nm (425oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
M1233064 M1233064
  • Torque 1.8Nm (255oz-In)
  • Current 6Arms
  • NEMA 23 standard flange
M1233062 M1233062
  • Torque 1.8Nm (255oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
M1233051 M1233051
  • Torque 1.4Nm (198oz-In)
  • Current 3Arms
  • NEMA 23 standard flange
M1233041 M1233041
  • Torque 1.1Nm (156oz-In)
  • Current 4.2Arms
  • NEMA 23 standard flange
LS1076 The LS10 stepper motor driver series offers an excellent price/performance ratio.

They are realized in open design and are easily mountable on the panel thanks to the L-shaped support integrated»read more

Technical Data

Power Supply Voltage From 24Vdc up to 90Vdc
Phase Current From 2Arms up to 6Arms in increments of 0.1Arms
Control Mode Step and Direction. Start/Stop
Digital Inputs 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST
Operating from 3V up to 28V at constant current
Each one NPN, PNP or Line Drive compatible
Step subdivision Microstepping. Selectable from full step to 1/128 step
STEP Max Frequency 300KHz
Protections, Alarms and Diagnostics Over and under voltage, thermal, Phase Motor interrupted
Short circuit phase to phase, phase to ground, phase-supply
Univocal indication for each anomaly
Connections By terminal block. Section of cable up to AWG14
Dimensions 78(H) x 110(L) x 25(W) mm
3.07(H) x 4.33(L) x 0.98(W) inches
Weight 155g
5.2oz

Benefits

  • Compact size
  • Resolution up to 25600 steps/rev
  • Integrated oscillator
  • Gate function for the control of several drives with a single STEP source
  • Damping of resonances
  • Power output stage at high efficiency
  • Digital I/O signal conditioning
  • Low cost