DS5087

Programmable Stepper Motor Drive Modbus-RTU RS485 160Vdc 8.5Arms (12Apk)

Related Products

UDP30 UDP30
  • Galvanic isolation
  • Drivers from Windows 98SE to Windows 7 32bit or 64bit
  • Powered via USB port
UDP Commander UDP Commander
  • Running under Windows
  • Simple and intuitive use
  • Single tool for all drives xS10, DS30 and DS5x
  • Free!
DP1831 DP1831
  • Single or three phase input up to 135Vac
  • Output up to 200Vdc
  • Current up to 12Arms
DP1832 DP1832
  • Braking resistor control
  • Single or three phase input up to 135Vac
  • Output up to 200Vdc
  • Current up to 12Arms

Matching motors

M1343050 M1343050
  • Torque 9.2Nm (1303oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343041 M1343041
  • Torque 8.1Nm (1147oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343031 M1343031
  • Torque 6.8Nm (963oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343021 M1343021
  • Torque 4.4Nm (623oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343011 M1343011
  • Torque 3.1Nm (439oz-In)
  • Current 2.8Arms or 5.6Arms
  • NEMA 34 standard flange
DS5087

The DS50 stepper motor programmable drives are equipped with Modbus-RTU fieldbus and communication interface RS485 (for the RS232 interface see the DS52»read more

Technical Data

Power Supply Voltage From 45Vdc up to 160Vdc
Phase Current From 4Arms up to 8.5Arms in increments of 0.1Arms
Control Mode Fieldbus and/or internal user program (development by free tool UDP Commander)
Field Bus Modbus-RTU RS485, configurable baud rate and format
Performance Up to 3000rpm with 1/128 of step resolution
Function blocks Assignment
Jump and subroutine call, conditional and unconditional
Wait for Event
Math 32bit
Logical operations (OR, AND, XOR, and SHIFT)
Waiting
User Variables Freely declarable with 1byte, 2byte, 3byte and 4byte size.
Special Features Reading and Writing of user variables via fieldbus
High-speed counter also usable for Encoder
Quote captures on the transition of one or more inputs
Timer
Automatic current reduction
Digital Inputs 4 optoisolated: DI0, DI1, DI2, DI3 freely usable
Operating from 3V up to 28V at constant current
Each one NPN, PNP or Line Drive compatible
Digital Outputs 2 optoisolated: FAULT
Operating up to 30V 50mA
Each one NPN or PNP compatible
Analog Inputs 2 converted to 11bit: AI0, AI1
Operating from -10V up to 10V
Also usable as digital inputs
Analog Outputs 1 converted to 10bit: AO0
Operating from 0V up to 10V
Current up to 10mA
Protections, Alarms and Diagnostics Over and under voltage, thermal, Phase Motor interrupted
Short circuit phase to phase, phase to ground, phase-supply
Univocal indication for each anomaly
Connections By functional removable terminal block. Section of cable up to AWG14
Dimensions 100(H) x 35(L) x 119(W) mm
3.94(H) x 1.38(L) x 4.69(W) inches
Weight 320g
11.3oz

Benefits

  • Cooperation between fieldbus and internal program possible
  • FREE programming software!
  • Up to 3000rpm at 1/128 steps/rev
  • All motion parameters changeable in realtime, also with motor running
  • 32bit mathematical functions
  • Digital and analog I/O
  • Fast mounting on DIN rail
  • Analog inputs also usable as digital inputs
  • Compact size
  • IP20 protection grade