DS1048

Stepper Motor Driver 50Vdc 8Arms (11.3Apk)

Related Products

UDP30 UDP30
  • Galvanic isolation
  • Drivers from Windows 98SE to Windows 7 32bit or 64bit
  • Powered via USB port
UDP Commander UDP Commander
  • Running under Windows
  • Simple and intuitive use
  • Single tool for all drives xS10, DS30 and DS5x
  • Free!
DP1651 DP1651
  • Single or three phase input up to 42Vac
  • Output up to 60Vdc
  • Current up to 16Arms
DP1652 DP1652
  • Braking resistor control
  • Single or three phase input up to 42Vac
  • Output up to 60Vdc
  • Current up to 16Arms

Matching motors

M1343050 M1343050
  • Torque 9.2Nm (1303oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343041 M1343041
  • Torque 8.1Nm (1147oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343031 M1343031
  • Torque 6.8Nm (963oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343021 M1343021
  • Torque 4.4Nm (623oz-In)
  • Current 3.5Arms or 7.1Arms
  • NEMA 34 standard flange
M1343011 M1343011
  • Torque 3.1Nm (439oz-In)
  • Current 2.8Arms or 5.6Arms
  • NEMA 34 standard flange
M1233071 M1233071
  • Torque 3Nm (425oz-In)
  • Current 6Arms
  • NEMA 23 standard flange
M1233064 M1233064
  • Torque 1.8Nm (255oz-In)
  • Current 6Arms
  • NEMA 23 standard flange
DS1048 The DS10 series is designed for DIN rail mounting and can be installed in the cabinet in few seconds.

The connection to the motor, to the logic and power signals are realized by useful removable»read more

Technical Data

Power Supply Voltage From 20Vdc up to 50Vdc
Phase Current From 3Arms up to 8Arms in increments of 0.1Arms
Control Mode Step and Direction. Start/Stop
Digital Inputs 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST
Operating from 3V up to 28V at constant current
Each one NPN, PNP or Line Drive compatible
Step subdivision Microstepping. Selectable from full step to 1/128 step
STEP Max Frequency 300KHz
Protections, Alarms and Diagnostics Over and under voltage, thermal, Phase Motor interrupted
Short circuit phase to phase, phase to ground, phase-supply
Univocal indication for each anomaly
Connections By functional removable terminal block. Section of cable up to AWG14
Dimensions 100(H) x 35(L) x 119(W) mm
3.94(H) x 1.38(L) x 4.69(W) inches
Weight 270g
9.5oz

Benefits

  • Fast mounting on DIN rail
  • Compact size
  • Integrated oscillator
  • Gate function for the control of several drives with a single STEP source
  • Resolution up to 25600 steps/rev
  • Damping of resonances
  • Power output stage at high efficiency
  • Digital I/O signal conditioning
  • IP20 protection grade